Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 567 / 585

Phones
539
Authentication : The Authentication page allows you to change the password to access the IP Phone
Web Client. Passwords are case sensitive.
To change the password:
1. Enter the current password in the Current Password field, if there is one.
2. Enter the new password once in the New Password field and again in the Confirm New
Password field.
To change the SIP authentication password:
1. Enter the authentication name.
2. Enter the current password in the Current Authentication Password field, if there is one.
3. Enter the new password once in the New Authentication Password field and again in the
Confirm New Authentication Password field.
To apply the new password, click Update .
SIP : The SIP Call Client Configuration page shows SIP-related information. This page is only
available when the phone is in SIP mode. This page contains the fields described in
Table 90 . To apply the changes, click Update .
Table 89: IP Web Interface—Trace Options
Field Name Default Indicates
Trace Host 0.0.0.0 The address of the remote device where trace output should
be sent.
Trace Host Port 0 The port number of the remote device where trace output
should be sent.
Trace SIP Disabled (For SIP Mode Only) Whether the trace output includes SIP
information.
UDP Trace Log Disabled Whether the trace output includes UDP log information.
Telnet/Serial Trace Log Disabled Whether the trace output includes Telnet/serial log
information.
Table 90: SIP Call Client Configuration Page Descriptions
Field Name Default Indicates
Phone Extension/Name 1000 The name used by the phone for authentication with
the SIP proxy server.
Display Name 1000 The user or registration name on the phone that is
shown if the phone has a display.
Proxy Server IP Address 192.168.200.100 The IP address of the primary SIP proxy Server.
Proxy Server Port 5060 The port of the primary SIP proxy Server.
(Sheet 1 of 2)