Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 561 / 585

Phones
533
To program the IP address:
1. Press a dialpad button to enter the IP address. The entire second line, except the dots, disap -
pears, and the number you entered appears in the first space.
The following options are available:
• Revert : Reverts to the old value found in the current database, and the phone updates the
display accordingly.
• Exit : Exits to the confirmation screen (last screen) without scrolling through all the other
options. See page 533 for more details on the confirmation screen.
• >>: Continues to the next screen in the series.
• <<: Returns to the previous screen in the series. Note that this option does not appear on
the Static IP Programming screen.
2. After you have finished programming, select either EXIT , >> , or << . The phone will check the
field for errors.
•
If there are no errors,
the phone displays the next programming screen.
•
If there are errors,
the phone displays INVALID ENTRY . Correct the error by either selecting
REVERT or modifying the incorrect entry.
Default Database and Exit
When you have scrolled through all the options, select EXIT from any of the screens or select
DEFAULT DATABASE from the initial screen. The following screen appears to confirm the changes.
You have the following options:
•
Yes : Overwrites the database. If you select this option, the CHANGES SAVED screen appears
to notify you that the changes have been saved. To continue initializing the phone, press any
button.
• No : Leaves the database as it was. If you select this option, the NO CHANGES SAVED screen
appears to notify you that the changes have been discarded. To continue initializing the phone,
press any button.
• << : Returns to the previous screen in the series.
S A V E C H A N G E S ?
Y E S
N O
< <