Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 119 / 585

Specifications
91
PS-1 Connection Interfaces
This section provides front and rear view representations of the Dell PS-1 chassis.
Processor Settings => Logical Processor Enabled
Processor Settings => Virtualization Technology Disabled
Processor Settings => C States Disabled
SATA Settings => SATA Controller AHCI
Boot Settings => Boot Mode BIOS
Boot Settings => Boot Sequence Retry Enabled
Integrated Devices => Embedded NIC1 and NIC2 Enabled
Integrated Devices => OS Watchdog Timer Enabled
Power Management => Power Management Maximum Performance
System Security => Power Button Enabled
System Security => NMI Button Disabled
System Security => AC Power Recovery Last
System Security => AC Power Recovery Delay Immediate
NOTE
The On/Off switch on the front of the chassis controls power to the system, and it should
remain On at all times.
Figure 3: Processing Server (PS-1) Chassis, Front View
Item Description
1 Digital Video Disk (DVD) drive. (Use for initial installation and system recovery.)
2 Video port. (DB-15 VGA connection to monitor. Can use front or rear ports.)
3 USB ports. The USB security key can be used in any USB port. (Use also to connect
keyboard and mouse if necessary.)
6 Power LED.
7 System Identification LED. (Used for system location. See www.dell.com for details.)
Table 13: Dell PowerEdge R210 BIOS Settings
BIOS Setting Required Settings
(Sheet 2 of 2)