Mitel MiVOICE 6930, User Manual

Page: 68 / 211

Customizing Your Phone
lxix
5.
Using the up and down navigation keys, highlight the applicable Bluetooth device you want to
connect to and press the
Connect
softkey.
The phone attempts to connect to the device.
6.
Press the
OK
button to acknowledge the successful connection.
The connected Bluetooth device is ready to use.
Audio
The
Audio
option on the IP phone allows you to set the audio mode for your IP phone, configure
headset settings, and personalize ring tones and tone sets.
Audio Mode
The 6930 allows you to use a handset, a headset, or handsfree mode to handle incoming and
outgoing calls. The
Audio Mode
option provides different combinations of these three methods to
provide maximum flexibility in handling calls. There are four audio mode options you can set:
Notes:
1.
If connecting fails, an error message displays on screen. Press
Retry
to attempt to connect
again, or
Cancel
to cancel the attempt.
2.
If connecting a mobile phone, depending on the connection state of the mobile phone,
you may need to retry multiple times before the mobile phone connects successfully.
Audio Mode Option Description
Speaker This is the default setting. Calls can be made or received using the handset or
handsfree speakerphone. In handset audio mode, pressing the
button
on the phone switches to handsfree speakerphone. In Speaker audio mode, lift
the handset to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset or
headset. Calls can be switched from the handset to headset by pressing the
button on the phone. To switch from the headset to the handset, lift the
handset.
Speaker/Headset Incoming calls are sent to the handsfree speakerphone first when the
button is pressed. By pressing the button again, you can switch back and forth
between the handsfree speakerphone and the headset. At anytime, lifting the
handset switches back to the handset from either the handsfree speakerphone
or the headset.