Mitel MiVOICE 6930 User Manual Download

Page: 169 / 211

Mitel 6930 SIP Phone User Guide

clxx

DND in Account Mode

From the

Home

screen press the right navigation key to move to the

Line Selection

screen.

Highlight the desired account using the up and down navigation keys.

Press the left navigation key to go back to the

Home

screen

With the account in focus on the

Home

screen, press the

DND

softkey to toggle DND on or off

for the account.

DND in Phone Mode (Default)

From the

Home

screen, press the

DND

softkey to toggle DND on or off for all accounts on the

phone.

DND in Custom Mode

From the

Home

screen, press the

DND

softkey.

The screen displays a list of the accounts on the phone and allows you to enable/disable a
specific account or all accounts.

Use the up and down navigation keys to scroll through the accounts and press the select button
to enable DND for the selected account.

Press the

Save

softkey to save your changes.

Call Forward Configuration

Call Forward on the IP phone allows incoming calls to be forwarded to another destination.

On the 6930, you can set Call Forward on the phone-side for a specific account or for all accounts
on the phone. You can set a Call Forward mode using the Mitel Web UI at the path,

Basic Settings

> Preferences > General > Call Forward Key Mode

Account

(default),

Phone

, and

Custom

. Call

Forward behaves according to the mode you set.

Note:

Enabling DND in Phone mode toggles all accounts on the phone to DND on.

Note:

Press the

All On

All Off

softkeys to quickly enable or disable DND for all

accounts.

Summary of Contents for MiVOICE 6930




















































































































































































































Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands

Mitel MiVOICE 6930, User Manual

Search results

Summary of Contents for MiVOICE 6930

Reviews:

Related manuals for MiVOICE 6930

Brands by name

Popular brands