Mitel 6930 SIP Phone User Guide
cxx
Configuring a Phone Lock Key
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>
.
Softkeys
2.
Select from
Key 1
through
Key 44
on the Top keys.
or
Select from
Key 1
through
Key 24
on the Bottom keys.
3.
In the
Type
field, select
Phone Lock
from the list of options.
Expansion Module Keys
4.
Select from
Key 1
through
Key 84
(M695).
5.
In the
Type
field, select
Phone Lock
from the list of options.
6.
Click
Save Settings
.
Paging Key
You can configure a
Paging
key on the phone that allows you to send a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without involving SIP signaling. You enter a
multicast IP address(es) and a port number for the Paging key, that when pressed, initiates an
outgoing multicast RTP session. This is called Group Paging on the IP phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP
streams. You can specify up to 5 listening multicast addresses at the path,
Basic Settings >
Preferences > Group Paging RTP Settings
.
For more information about Group Paging and how it works, and to specify multicast addresses,
see
Note:
You can lock/unlock the phone using the new key you just configured, using the
Mitel Web UI at the path
Operation > Phone Lock
, or using the
Phone Lock
option on
the IP phone UI at the path
Options > Lock > Phone Lock
. For more information about
using the lock/unlock feature, see
“Locking the Phone Using the IP Phone UI”
.
Summary of Contents for MiVOICE 6930
Page 1: ...Mitel 6930 SIP Phone 58015330 REV00 RELEASE 5 0 0 USER GUIDE ...
Page 10: ...Table of Contents xi ...
Page 211: ......
