background image

Configuring Softkeys

cxiii

The Directory feature allows you to view Directory entries from multiple sources and store frequently 
used names and numbers on the phone. You can also dial directly from a Directory entry.

In addition to creating a 

Directory

 key, you can also download a Directory to your PC, if required, 

using the Mitel Web UI.

Configuring a Directory Key Using the Mitel Web UI

1.

Click on 

Operation > Softkeys and XML

.

or
Click on 

Operation > Expansion Module <N>

.

Softkeys

2.

Select from 

Key 1

 through 

Key 44

 on the Top keys.

or
Select from 

Key 1

 through 

Key 24

 on the Bottom keys.

3.

In the 

Type

 field, select

 Directory

.

4.

In the 

Label

 field, enter a label to apply to this key.

5.

In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

Note: 

For more information about the Directory, se

“Directory”

 on 

page cxlvii

.

Directory Key

Summary of Contents for MiVOICE 6930




















































































































































































































Reviews: