Mitel MiVOICE 6930, User Manual

Page: 108 / 211

Configuring Softkeys
cix
Softkeys
2.
Select from
Key 1
through
Key 44
on the Top keys.
or
Select from
Key 1
through
Key 24
on the Bottom keys.
3.
In the
Type
field, select
Speed Dial/Xfer
.
4.
In the
Label
field, enter a label for the Speed Dial/Xfer key.
5.
In the
Value
field, enter the speed dial extension or the extension to transfer calls to (for example,
3600).
6.
In the
Line
field, select the line for which you want to use the key functionality.
Valid values are:
• global
•
1
through
24
7.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
8.
Select from
Key 1
through
Key 84
(M695).
9.
In the
Type
field, select
Speed Dial/Xfer
.
10.
In the
Value
field, enter the speed dial extension or the extension to transfer calls to (for example,
3600).
11.
In the
Line
field, select the line for which you want to use the key functionality.
Valid values are:
• global
•
1
through
24
12.
Click
Save Settings
.
Speed Dial/Conf
The 6930 allows you to configure a softkey or expansion module key to be used as a speed dial
conference key (
Speed Dial/Conf
key) while remaining in the current call. This key allows a user
on a call to conference another party at a pre-defined number while remaining in the call.
For example, while on an active call, a user can use the
Speed Dial/Conf
key to dial a recording
service and have the resulting conference recorded.
If you configure a softkey or expansion module key as a
Speed Dial/Conf
key and you press this
key while on an active call, the focused line changes to the dialing line. A
Cancel
softkey displays
on the phone allowing you to abort the conference speed dial if required.
Note:
If currently in a conference, the
Speed Dial/Conf
key is disabled on the active call.
Note:
This feature is not compatible with centralized conferencing.