Mitel MiVoice 5000 User Manual Download

Page: 27 / 73

During a call

Making a transfer during an enquiry call

You are engaged in an enquiry call (with one correspondent on line and another on hold).
You wish to link up your two correspondents then hang up.

1 - Press the context-sensitive

Transfer

key.

2 - Press the key of the blinking line then press

Transfer

. This is

the correspondent who has been on hold.

-> The call has been transferred.

Answering a second call

You are on line with a correspondent and receive a second call (a new line key flashes).

• Press the flashing line key to take the second call (the first

correspondent is put on hold).

You can switch from one call to the other or set up a three-way
conference.

Setting up a conference call

You are engaged in a call with a correspondent and you wish to set up a three-way con-
ference with another correspondent.

1 - Press the context-sensitive

Conf.

key.

-> The other party is put on hold.

2 - Dial the number of the other party.

3 - Press

Dial

4 - When the second correspondent is on line, press

Conf

. again

to confirm (the first correspondent is kept on hold until the
conference is validated).

-> The numbers of your two correspondents are displayed on

screen. You are holding a conference call.

If you cannot reach the second correspondent, press the blinking
line key to resume the call with the correspondent on hold.

Transfer

Conf.

Dial

Conf.

Summary of Contents for MiVoice 5000










































































Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands

Mitel MiVoice 5000, User Manual

Search results

Summary of Contents for MiVoice 5000

Reviews:

Related manuals for MiVoice 5000

Brands by name

Popular brands