manualshive.com logo in svg

Mitel Inter-Tel Axxess, Administrator'S Manual, Page: 123 / 384

Share
Download
Mitel Inter-Tel Axxess Administrator'S Manual Download Page 123

Page 107

System Hardware

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

IP and SIP Feature Exceptions

IP and SIP Feature Exceptions

Some devices cannot fully support certain features due to hardware or software restrictions.
These exceptions are listed below by device.

Model 8600: 

The Model 8600 endpoint operates in ITP or SIP mode, however, this endpoint

does not support the following features in either mode:

•

Feature Button Default (fc 395)

•

Microphone Mute On/Off (fc 314)

•

Program Buttons (fc 397)

•

Review Buttons (fc 396)

•

Switch Keymap (fc 399)

Model 8690:

 The Model 8690 endpoint operates in ITP or SIP mode, however, this endpoint

does not support the following features in either mode:

•

Change Language (fc 301)

•

Feature Button Default (fc 395)

•

LCD Contrast Control (fc 303)

•

Program Buttons (fc 397)

•

Review Buttons (fc 396)

•

Switch Keymap (fc 399)

Models 8664/8665/8668:

 The Models 8664, 8665, and 8668 wireless IP endpoints operate in

ITP mode, however, they do not support the following ITP features:

•

Automatic Intercom Access On/Off (fc361)

•

Automatic Line Access On/Off (fc 360)

•

Background Music On/Off (fc 313)

•

Change Language (fc 301)

•

Group Listen (fc 312)

•

Handsfree On/Off (fc 319)

•

Headset On, Headset Off, Headset On/Off (fc 315, 316, 317)

•

LCD Contrast Control (fc 303)

•

Page Receive On/Off (fc 325)

•

Switch Keymap (fc 399)

Model 8601: 

The Model 8601 operates in SIP mode, however it does not support the follow-

ing SIP features:

•

Headset On, Headset Off, Headset On/Off (fc 315, 316, 317)

•

LCD Contrast Control (fc 303)

•

Show IP Address (fc 300)

Summary of Contents for Inter-Tel Axxess

































































































































































































































































































































































































Reviews:

No comments