Mitel INT4000, User Manual, Page: 42 / 62

Call Features
Page 30
Mitel ® INT4000 User Guide – Issue 6, December 2008
Paging
The Paging feature allows you to make an announcement through endpoint speakers or
external speakers (if your system is equipped with external paging equipment). To prevent
announcements from transmitting through every endpoint in the system, this feature uses page
zones. Each zone contains a different combination of extensions and external paging
equipment, and is programmed by your System Administrator. Ask your trainer or System
Administrator how the zones are programmed, and list them here for your convenience.
Enabling Paging
You can enable or disable page receiving for your endpoint by using the Page Remove/Replace
feature code. If your endpoint is assigned to more than one page zone, all zones are removed
or replaced at once (you cannot turn off individual zones).
To turn paging on and off for your endpoint :
Press and .
Making Pages
To make pages:
1. Dial
.
2. Dial the desired zone number (0-9).
3. Listen for the tone and then make your announcement.
4. Press to hang up.
Performing a “Hookflash” During a Call
Certain telephone service companies may require a timed hookflash (a quick hang up and
release).
To generate a hookflash while using a line:
Press and .
0 _______________________ 5 _______________________
1 _______________________ 6 _______________________
2 _______________________ 7 _______________________
3 _______________________ 8 _______________________
4 _______________________ 9 _______________________
SPCL 3 2 5
7
TALK
NOTE This features is known as a “Recall” in European systems.
SPCL
3 3 0