Phoning
Mitel 6867 SIP / Mitel 6869 SIP
59
eud-1664/1.3 – R5.0 – 06.2017
Acknowledging an appointment call
You can set a call to remind you about an appointment, for example.
Appointment call
is displayed as soon as an appointment call is received.
Without acknowledgement, the appointment call will ring for 1 minute.
The following options are available: You have to enter or change the time
in the Self Service Portal.
You must save this function to a configurable key using Self Service Portal
(see chapter "Configuring or deleting a key assignment", page 97).
Notes:
• If you activated forwarding, the appointment call is not forwarded.
• If you are in call, the appointment call is made as soon as you end the
call.
Activating the phone lock:
Press the function key for
Phone lock on/off
.
➔
The phone is locked and can only be unlocked using your PIN. is displayed
in the status line.
Deactivate the phone lock:
1. Press the function key for
Phone lock on/off
.
2. Enter the PIN and confirm with the
Enter
softkey.
3. Confirm the security prompt with the
Yes
softkey.
Note:
Use the following function codes (see also Features Overview Mitel
415/430/470 user guide on the
), to activate or deactivate the
phone lock for all phones within the one number user concept (see "One num-
ber user concept", page 8):
• Activating the phone lock: Enter the function code *33* <PIN> #
• Deactivate the phone lock: Enter the function code #33* <PIN> #
Menu
Description
Single appointment
call on/off
Activate appointment call on a one-off basis.
Repeat appointment
call on/off
Activate appointment call permanently
