Description of the phone
7
Alphabetical keypad
Your terminal is equipped with a 34-key qwerty-type keypad. To enter a blank, use the
space bar.
Pressing the "X" key to the right of the keypad erases the character entered last.
Pressing «Shift +» provides access to the following characters:
- ’. , ?!"( ) @ /: _ ; + & % * = < > $ #
Correcting an entry
You have entered an incorrect number or character. You can either erase the entry cha-
racter by character or cancel it completely.
Standard codes
This document describes the standard access codes to the different functions, which may
be personalised by the system operator. In that case, the operator will indicate to you the
specific access codes to enter in the spaces reserved for that purpose (for example: Dial-
out code
0
or
; enter the personalised code in the frame).
To erase the last character:
Press the Correct key.
Correcting a wrong number:
If the line has not already been seized, you can use the horizontal
keys on the browser to place the cursor after a wrong character, to
delete it by pressing the key
then inserting a new character.
To finish the saving procedure:
Press the END key: The phone returns to standby mode.
c
c