Other functions
81
Line protection function during data transmission
You want to send data via your telephone line (using a modem or Minitel on the line) and
therefore do not want to be disturbed by a call (i.e. non-presentation of waiting calls).
You can temporarily activate this function during a call (Voir “Other features available du-
ring a call”, page 23).
To have this function continuously activated, we recommend that you contact your system
operator.
On-hold function
The on-hold function can be programmed via the
programmable key, only from the iPBX
management portal. If you use this function regularly, contact your system operator and
ask him to program it.
For more detailed information on the use of the key, refer to the following chapter: “Placing
a party on hold and resuming the call on the same phone”, page 19
Store and redial function
If your party does not answer or is busy, you can temporarily record their number in order
to call them back later (even if you dial other numbers in the meantime).
The store and redial function can be programmed via the
programmable key, only from the
iPBX management portal. If you use this function regularly, contact your system operator
who will get it programmed.
To store the number :
Your party is busy or does not answer:
3 - Press the Store and Redial programmed key.
-> An audible message indicates that the action has been
validated. This number remains stored until it is redialled or
erased
To call the stored number:
To redial this number:
• Press the Store and Redial programmed key.
-> The phone automatically calls the stored number. When the
called party answers, pick up the handset to talk. As soon as
the recalled contact has answered, the number is no longer
stored and the indicator of the key goes off.
Storage
Storage