Phone settings
70
Programming automatic headset connection
The Auto connection menu is displayed if the terminal is set to multi-key mode (See “Pro-
gramming the multi-key function”, page 45). However, automatic connection will only take
effect if the headset is activated (normal mode or ContactCenter mode).
Two values are proposed:
•
Deactivated
: line seizure is necessary to start the conversation.
Press
,
, or take the call on the headset.
•
Activated
: the call is automatically initiated on the headset.
Activating the interphone mode
The intercom mode is used to communicate with internal parties, without any action on
your part.
1 - Press the
Menu
Fox key.
2 - Select
Settings
and confirm.
3 - Select
Audio
and confirm.
4 - Select
Intercom
and confirm.
5 - Select the activation of the interphone mode (
Activated
)
-> Phone in standby mode, the
symbol is displayed in order
to show that the interphone mode is active.
To deactivate the interphone mode, proceed as described above
until step 5, where you select the deactivation of the interphone
mode (
Deactivated
).
Note:
To activate or deactivate the interphone mode while the
phone is in standby mode, you can also press
.
Adjusting the screen contrast
1 - Press the
Menu
Fox key.
2 - Select
Settings
and confirm.
3 - Select
Display
and confirm.
Auto connection
Menu
Settings
Audio
Intercom
Activated
Menu
Settings
Display