Mitel 6970 Page 79 User Manual Download

Page: 79 / 96

Mitel 6970 IP Conference Phone User Guide

Diagnostics

The

Diagnostics

settings should only be used by your System Administrator or under his/her

direction.

Audio

The

Audio

setting on the Mitel 6970 IP Conference Phone allows you to personalize ring tones and

tone sets.

Configuring ring tones using the IP Phone UI

Global configuration only

1. Tap the

Settings

softkey on the phone screen to open the

Settings

menu.

2. Tap the

(Audio)

icon.

3. Tap the

Ring Tones

icon.

4. Select the desired ring tone (

Tone 1

through

Tone 15

Silent

, or any custom ring tones

installed)

5. Tap the

Save

softkey to save your changes.

The ring tone you select is immediately applied to the IP phone.

Configuring tone sets using the IP Phone UI

Global configuration only.

1. Tap the

(

Settings

) softkey on the phone screen to open the

Settings

menu.

2. Tap the

(Audio)

icon.

Summary of Contents for 6970

































































































Search results

Summary of Contents for 6970

Reviews:

Related manuals for 6970

Brands by name

Popular brands

Mitel 6970, User Manual

Search results

Summary of Contents for 6970

Reviews:

Related manuals for 6970

Brands by name

Popular brands