
Phoning
Mitel 6920 SIP
59
eud-1763/1.0 – R5.0 HF1 – 08.2017
during this predefined time or puts the handset back down again, a con-
nection with the Hotline number is automatically set up. Contact your sys-
tem administrator for more information.
Overview of available functions
This section contains a list of all the functions you can store under a con-
figurable key via the Self Service Portal. Please note that the selection of
functions depends on the selected phone and its authorisation level.
Notes:
• More information on how to save functions to a configurable key using
function commands and a function code can be found in the online help
for the Self Service Portal (see chapter "MiVoice Office 400 Self Service
Portal", page 9).
• You will find a list of all function codes in the user's guide “Features
Overview Mitel 415/430/470” on the
. Please note than
function codes can only be used as prefix dialling on your phone.
Using the hotline:
User needs help. They pick up the handset of their phone or press the loud-
speaker/headset key.
➔
A connection with the hotline number is automatically set up after a prede-
fined time without the user having to do anything else.
Function
Description
Agent: Log in/log out
Log into/out of the queue as an agent (control of call
routing in the queue).
Agent: Wrap-up time
on/off
Activate/deactivate agent wrap-up time.
Announcement to group
Speak directly to a group of internal users via the
loudspeaker - where available - without them having
to first pick up the call. An announcement is a one-
sided connection and is indicated by two short signal
tones on the recipient phone. Announcement groups
will be defined by your system administrator. The
group number must be entered as two digits.