Mitel 6800 Series, Administrator'S Manual, Page: 974 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-232
PROGRAMMABLE KEY SETTINGS
The value of "N" for the following parameters is dependent on the number of programmable
keys available on the 6863i and 6865i phone models. See the table on
page 221 for the
applicable values. Available programmable key types are dependent on the IP phone model.
Please refer to the respective model’s User Guide for the model’s available programmable key
types.
Note:
Applicable to the 6863i and 6865i IP phones only. Available functions vary by IP
phone model.
PARAMETER –
prgkeyN type
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
The type of programmable key to configure. Valid types are:
•
none
- Indicates key is disabled.
•
line
- Indicates key is configured for line use.
•
speeddial
- Indicates key is configured for speeddial use.
Speeddial is applicable to the M680 and M685i also. You can
configure a key to speeddial a specific number by pressing that
key. Optionally, you can also configure a Speeddial key to dial
prefix numbers. With this option, the prefix numbers automatically
dial when you press the key, and the phone waits for you to enter
the remaining numbers to dial out.
Note
: When there is an active call, the Speeddial keys send
DTMF digits through the active voice path. To dial out, you have
to first put the active call on hold and then press the Speeddial
key.
•
dnd
- Indicates key is configured for do not disturb on the phone.
This option is "
Do Not Disturb
" in the Mitel Web UI). You must
also set the DND key mode (see “DND Key Mode” on page 5-95
and “DND Key Mode Settings” on page A-185 for details).
•
blf
- Indicates key is configured for Busy Lamp Field (BLF) use.
User can dial out on a BLF configured key. You can configure a
maximum of 50 BLFs shared between the phone and any
attached expansion modules.
•
list
- Indicates key is configured for BLF/List use. (This option is
BLF/List in the Mitel Web UI). User can dial out on a BLF/List
configured key. You can also use the
“
BLF List URI
” parameter
to specify a URI for the phone to access for the BLF/List.
•
acd
- (for Sylantro/BroadWorks servers only) Indicates the key is
configured for Auto Call Distribution (called “
Auto Call
Distribution
” in the Mitel Web UI). The ACD feature allows the
Sylantro/BroadWorks server to distribute calls from a queue to
registered IP phone users (agents).
•
xml
- Indicates the key is configured to accept an XML application
for accessing customized XML services. You can also specify an
XML key URL for this option.
•
flash
- Indicates the key is set to generate a flash event when it is
pressed. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when
the call is not on hold).