Mitel 6800 Series, Administrator'S Manual, Page: 951 / 1113

Operational, Basic, and Advanced Parameters
A-209
INCOMING INTERCOM SETTINGS
PARAMETER –
sip intercom line
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the line for which the IP phone uses the configuration from,
when making the Intercom call. The IP phone uses the first available
line for physically making the call but uses the configuration from the
line you set for this parameter.
Note:
The "
sip intercom type
" parameter must be set with the
Server-Side
option to enable the "
sip intercom line
" parameter.
FORMAT
Integer
DEFAULT VALUE
1
RANGE
0-2 (6863i)
0-24 (6865i/6867i/6869i/6873i)
EXAMPLE
sip intercom line: 1
PARAMETER –
sip allow auto answer
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Enables or disables the IP phone to allow automatic answering for
an Intercom call. If auto-answer is enabled on the IP phone, the
phone plays a tone to alert the user before answering the intercom
call. If auto-answer is disabled, the phone treats the incoming
intercom call as a normal call.
FORMAT
Boolean
DEFAULT VALUE
1 (true)
RANGE
0 (false - do not allow auto-answer)
1 (true - allow auto-answer)
EXAMPLE
sip allow auto answer: 0
PARAMETER –
sip intercom mute mic
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Enables or disables the microphone on the IP phone for Intercom
calls made by the originating caller.
FORMAT
Integer
DEFAULT VALUE
1 (true)
RANGE
0 (false - microphone is not muted)
1 (true - microphone is muted)
EXAMPLE
sip intercom mute mic: 1