Mitel 6800 Series, Administrator'S Manual

Page: 758 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-16
OPTIONS 132 - TRANSFER VLAN ID ASSIGNMENT USING DHCP
PASSWORD SETTINGS
PARAMETER –
dhcp option 132 vlan id
enabled
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Enables the phone to transport the VLAN ID parameter in the DHCP
protocol. When the phone receives the VLAN ID from the DHCP and
the value is different from the one used by the phone to trigger the
DHCP request, the phone reboots and then sends a new DHCP
request in the new VLAN. The phone will remember the VLAN ID
obtained by DHCP options so that on a reboot, the phone will send
a DHCP request using the correct VLAN.
FORMAT
Integer
DEFAULT VALUE
1 (enabled)
RANGE
0-1
0 (disabled)
1 (enabled)
EXAMPLE
dhcp option 132 vlan id enabled: 0
PARAMETER –
admin password
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Allows you to set a new administrator password for the IP phone.
Note:
The IP phones support numeric characters only in passwords.
If you enter a password with alpha characters, the phone uses the
default password instead.
FORMAT
Integer
DEFAULT VALUE
22222
RANGE
0-4294967295
EXAMPLE
admin password: 1234567890
PARAMETER –
user password
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Allows you to set a new user password for the IP phone.
Note:
The IP phones support numeric characters only in passwords.
If you enter a password with alpha characters, the phone uses the
default password instead.
FORMAT
Integer
DEFAULT VALUE
Default value is an empty string ““ (left blank)
RANGE
0-4294967295
EXAMPLE
user password: 123