manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual, Page: 751 / 1113

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 751

Operational, Basic, and Advanced Parameters

A-9

OPERATIONAL, BASIC, AND ADVANCED 
PARAMETERS

The following sections provide the configuration parameters you can configure on the IP phone. 
Each parameter table includes the name of the parameter, a description, the format, default 
value, range, and example. The table also provides in which configuration file the parameter 
can be defined (startup.cfg, <model>.cfg, <mac>.cfg).

SIMPLIFIED IP PHONE UI OPTIONS MENU

PARAMETER – 

options simple menu

CONFIGURATION FILES 

startup.cfg, <model>.cfg, <mac>.cfg

DESCRIPTION

Allows you to enable a simplified options menu or enable the full 
menu on the IP Phone UI.

WARNING: WHEN USING THE SIMPLIFIED MENU, YOU 
CANNOT CHANGE THE NETWORK SETTINGS FROM THE IP 
PHONE UI. IF THE NETWORK SETTINGS BECOME 
MISCONFIGURED, YOU MUST USE THE MITEL WEB UI TO 
CONFIGURE THE NETWORK SETTINGS OR FACTORY 
DEFAULT THE PHONE THROUGH THE WEB UI AND THEN USE 
THE PHONE UI’S FULL OPTIONS MENU TO RECOVER THE 
NETWORKS SETTING.

FORMAT

Boolean

DEFAULT VALUE

0 (full options menu)

RANGE

0 (full options menu)
1 (simplified options menu)

EXAMPLE

options simple menu: 1

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments