Mitel 6800 Series, Administrator'S Manual

Page: 724 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
9-12
SYSTEM MESSAGES DISPLAY
When the phone reboots, information regarding the reboot is added to the reboot.log file and
can also be viewed in the
Advanced Settings->Troubleshooting->System Messages
menu
through the phone’s Web UI.
The image below is an example of the information System Messages section of the Web UI
upon reboot. This same information is logged in the reboot.log file.
The first line of the log details the current date, time, and up time, and the subsequent lines
encompass the reboot information (up to nine lines sorted from newest event to oldest). The
reboot information encompasses the date and time of the reboot (2015-11-02 09:35:02), the
up time (up 3 days), and the reboot code/cause of the reboot
(PraxisOptionsRestartScreen::Restart).
The following table lists the reboot codes that are supported in this release and a description
of what the codes mean:
REBOOT CODE DESCRIPTION
WEBUI::Restart Reboot prompted by pressing the
Restart
button
in the
Operation > Reset > Phone
menu of the
Web UI or by changing the network configuration
settings through the Web UI.
AutoResync::ForceResync Reboot triggered by an external event (primarily
when a reboot is prompted by the processing of a
NOTIFY message with a resync request).
AutoResync::TimeForResync Reboot prompted due to scheduled auto resync
time (when the scheduled time arrives, the phone
will check with the configuration server and if any
changes are detected, the phone will reboot).
MAINTASK::8021X Reboot prompted due to 802.1x configuration
changes.
HQPAR::FIRMWARE_UPGRADE_OK Reboot prompted by the detection of new firmware
during boot up.
HQPARS::CFG_ENCRYPTION_KEY Reboot prompted by the detection of vendor
configuration file encryption key changes during
boot up.
TR69::rebootHandler Reboot prompted by a restart initiated through
TR-069.
TR69::FACTORYRESET Reboot prompted by a factory reset initiated
through TR-069.