manualshive.com logo in svg

Mitel 6800 Series, Administrator'S Manual, Page: 663 / 1113

Share
Download
Mitel 6800 Series Administrator'S Manual Download Page 663

Advanced Operational Features

6-74

8.

Press the 

Description

 field and using the  on-screen keyboard or dialpad keys enter or 

edit the description.

9.

Press the 

On 

checkbox to enable the location for BroadSoft Anywhere.

10.

Press the 

Alternate Number

 field and using  on-screen keyboard or dialpad keys enter or 

edit the alternate number.

11.

Press the 

Call Control 

checkbox if desired to enable the feature. When enabled, call control 

services will be performed by the BroadWorks Anywhere location.

12.

Press the 

Diversion Inhibitor 

checkbox if desired to enable the feature. When enabled, the 

respective location will be prevented from redirecting or forwarding incoming calls to an-
other even if call forward is activated.

13.

Press the  

Answer Confirmation 

checkbox desired to enable the feature. When enabled, 

the BroadWorks call manager will prompt for an answer confirmation when an incoming 
call is answered by the respective location.

14.

Press the 

Add 

softkey to save your changes.

15.

Repeat Steps 6 to 14 for any additional phone numbers you want to configure.

16.

Press the 

Save 

softkey to save your changes.

ENABLING XSI FEATURES USING THE CONFIGURATION FILES

You use the following procedure to enable Xsi feature support:

For the specific parameter you can set in the configuration files, see Appendix A, the section, 

“Xsi Feature Settings”

 on 

page A-304

.

FEATURE RE-BRANDING SUPPORT FOR BROADSOFT-BASED SER-
VICE PROVIDERS

The 6800 series SIP phones support the configuration of a number of BroadSoft features 
through the native phone UI as well as the phone’s Web UI. References to these features in 
the respective UI may contain the strings "BroadSoft", "BSFT", or "BroadWorks" (e.g. 
"BroadSoft SCA", "BSFT Call Settings", or "BroadWorks Anywhere"). Starting with Release 
4.2.0 SP1, service providers are able to replace these BroadSoft-related strings in the UI with 
their own custom branding names.

BroadSoft-related references on the phone can be categorized into three types:

•

References using a full service provider name:

•

Used on the SIP phones when referencing a feature or option that encompasses the 
full service provider’s name.

•

The default string that is replaced when this value is defined is "BroadSoft".

•

For example,  "BroadSoft Call Settings" on the 6867i, 6869i, and 6873i SIP phones as 
well as "BroadSoft SCA" and "BroadSoft Xsi" on all the 6800 series SIP phones.

 CONFIGURATION FILES

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments