Mitel 6800 Series, Administrator'S Manual, Page: 543 / 1113

Operational Features
5-280
CUSTOMIZABLE DIRECTORY LIST KEY
The IP phones may have a Directory List key (either a hard key or softkey/programmable key)
depending on the model of the phone. An Administrator can specify a URI override for the
Directory List key by defining the “
directory script”
parameter in the configuration files.
Specifying a URI for this parameter causes the creation of an XML custom application instead
of the standard function of the Directory List key. An Administrator can configure this parameter
using the configuration files only.
CREATING A CUSTOMIZABLE DIRECTORY LIST KEY
Use the following procedure to create a customized Directory List key on the IP Phone using
the configuration files.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Customizable Directory List Key”
on
page A-157
.
VOICEMAIL
The Voicemail feature on the IP phones allow you to configure lines with phone numbers so
the phone can dial out to connect to a voicemail server. You associate the Voicemail numbers
with the phone numbers configured on each line.
For each assigned Voicemail number, there can be a minimum of 0 or a maximum of 1 Voicemail
access phone number.
The Voicemail list displays a list of phone numbers assigned to the IP phone that has registered
voicemail accounts associated with them.
The end of the Voicemail list displays the number of new voicemail messages (if any exist).
CONFIGURING VOICEMAIL
You configure Voicemail in the configuration files to dial a specific number to access an existing
voicemail account. The user then follows the voicemail instructions for listening to voicemails.
CONFIGURATION FILES
Note:
The Voicemail list does not display the voicemail access number.
Note:
Multiple voicemail registration and monitoring voicemail accounts is available on
the IP phones. See
“Speeddial/MWI Key”
on page 187 for more information.
Note:
The phone must have a registered voicemail account from a server for this feature
to be enabled. When no registered voicemail accounts are registered to the phone, the
display shows "List Empty".