Mitel 6800 Series, Administrator'S Manual, Page: 306 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-43
PICTURE ID FEATURE
The Picture ID feature on the 6867i, 6869i, and 6873i shows a picture ID of a caller on the LCD
for all of the following events on the phone:
• Incoming Calls (matched to Caller ID numbers)
• Outgoing Calls (matched to dialed numbers)
• Directory entries
• Received Callers List entries
• Outgoing Redial List entries
Your Administrator stores the pictures in a centralized picture repository. The pictures are
dynamically retrieved from the centralized server for each call and then locally cached in the
phone to reduce network traffic.
If there is no picture on the central server for the dialed number and/or Caller Id number, and
Directory, Received Callers List, and/or Outgoing Redial List entry, the generic avatar image is
shown.
Pictures must be in “.png” format, 150 pixels wide x 150 pixels tall, and in 24-bit or 32-bit color.
The filenames for pictures must be stored using the phone number as the filename (for example,
9995551234.png). Enabling and disabling Picture ID on the phone can be done by an
Administrator using the configuration files only
Enabling/Disabling the Picture ID on the Phone Using the Configuration Files
Use the following parameter to enable/disable Picture ID on the phone.
Note:
Applicable to the 6867i, 6869i, and 6873i IP Phones only.
Notes:
1.
The Picture ID feature supports the use of TFTP, FTP, HTTP, and HTTPS protocols
when downloading pictures.
2.
The resolution specification for Picture IDs in releases previous to Release 4.2.0
was 150x200 pixels. Picture IDs that are 150x200 pixels can still be used, but will
not be optimally displayed on-screen due to the UI redesign implemented in Release
4.2.0. To align with the new UI implemented in Release 4.2.0, ensure the resolution
of your Picture IDs are 150x150 pixels.
CONFIGURATION FILES
Generic Avatar Image