Mitel 6800 Series Administrator'S Manual Download Page 303

Page: 303 / 1113

Operational Features

5-40

SCREEN SAVER

A screen saver displaying the date and time and the number of missed calls (if applicable) is

displayed for the 6867i, 6869i, and 6873i IP phones after a specified amount of inactivity.

The amount of time the phone must be idle before the screen saver initiates is configurable
through the phone’s UI or by defining the “

screen save time

” parameter in the configuration

files.

CONFIGURING THE SCREEN SAVER TIMER USING THE CONFIGURA-
TION FILES

Use the following parameter to configure the screen saver timer.

For specific parameters you can set in the configuration files, see Appendix A, the section,

“Screen Saver Settings”

page A-64

Note:

Applicable to the 6867i, 6869i, and 6873i IP Phones only.

Note:

If there are no missed calls, only the date and time are displayed.

CONFIGURATION FILES

Summary of Contents for 6800 Series


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6800 Series

Reviews:

Mitel 6800 Series, Administrator'S Manual, Page: 303 / 1113

Search results

Summary of Contents for 6800 Series

Reviews: