Mitel 6800 Series, Administrator'S Manual

Page: 1060 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-318
TROUBLESHOOTING PARAMETERS
The following parameters in this section allow the system administrator to set logging and
support settings for troubleshooting purposes.
LOG SETTINGS
Note:
Enabling the syslog module and configuring debug levels should only be used for
support purposes. Mitel recommends Administrators leave the debug level at its default
for normal production use. Enabling all the debug levels on the phone may impact
performance and normal operation of the phone.
PARAMETER –
log server ip
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the IP address of the log server to which log information will
be transmitted.
FORMAT
IP address
DEFAULT VALUE
0.0.0.0
RANGE
N/A
EXAMPLE
log server ip: 192.168.3.2
PARAMETER –
log server port
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the IP port of the log server. This is the IP port that
transmits information from the IP phone to the IP address location.
FORMAT
Integer
DEFAULT VALUE
0
RANGE
Any valid IP port
EXAMPLE
log server port: 2