20
5.19 Product Information
Information concerning the
instrument
model,
the
software version and the
serial number of the main unit
is displayed.
Press
,
, F1 or F3
key to close the dialog box.
5.20 Reset System
In case the instrument can no longer be operated, or you need to make a basic initialization
(factory setting), you can reset the instrument to original.
The instrument can be reset by the System Reset function. All the stored data inside the main
unit and user calibration will be cleared during system reset. And the instrument settings will be
reset to default.
To reset the instrument:
Activate
the
System
Reset function. Then
you will see right dialog.
Press
or F3 key to
confirm
the
reset
operation. Or press F1
key to cancel the reset
operation.
NOTE:
The effects of resetting the instrument may not be reversed.No key action should be
performed during resetting process.
5.21 Print via Bluetooth
The instrument has Bluetooth function module. It can be connected to a portable Bluetooth
thermal mini-printer for wireless printing. Operating steps to set up the bluetooth connection are as
follows:
1
.
Start up the Bluetooth mini-printer.
2
.
Set the Bluetooth
role of the instrument to
Master mode.
3
.
4
.
The instrument will
ask the operator if need to
re-search nearby Bluetooth
printer shown as right figure.
5
.
Select “YES” for the
first time to print. Otherwise,
select “NO”.
6
.
7
.
The gauge then try to set up a connection with the mini-printer via Bluetooth. Wait for several
seconds. When the Bluetooth status light on the front panel of the main unit is always on, the
Bluetooth connection between the instrument and the mini-printer is established successfully.
Note: When the instrument is turned off and once again turned on, the Bluetooth