13
mvip@mitech-ndt.com
6.5 Test Set
At the main display interface, press key
【
MENU
】
to enter the main menu.
Press key
【
ENTER
】
to enter Test Set Menu.
The symbol ↓ at the left side of underside menu
indicates that the menu has not ended. Press
key
【
】
could continuously glance downward.
The symbol ↑ at the left side of the upside menu
indicates that the menu has not ended. Press
【
】
could continuously glance upward.
Press key
【
】
or
【
】
to move the cursor to the
line you want to set, and press key
【
ENTER
】
to
confirm it.
Note
：
1. When
【
Hard/бb
】
is switched to бb,
the hardness scale could not be selected.
The cursor will skip over
【
Hardness Scale
】
while moves the cursor.
2. Only D type of impact device has the
function of бb measure. So the cursor could
not move to
【
Hard/бb
】
while use other
impact device.
6.5.1 Impact Direction Setting
Press key
【
】
or
【
】
to move the cursor
to the impact direction that you will preset.
Press key
【
ENTER
】
to confirm it.
Press key
【
ESC
】
to cancel it.
6.5.2 Average Times Setting
Press
【
】【
】
to move the cursor. Press
【
】【
】
to change the number. Press
key
【
ENTER
】
to confirm it. Press key
【
ESC
】
to
cancel it.
6.5.3 Material Setting
When
【
Hard/бb
】
is preset to hardness, it will display the following material: Steel and Cast Steel
、
Cold
Work Tool Steel
、
Stainless Steel
、
Gray Cast Iron
、
Nodular Cast Iron
、
Cast Aluminum Alloys
、
Copper-Zinc
Alloys
、
Copper-Aluminum Alloys
、
Wrought Copper and Wrought Steel.
Print Set
Memory Manager
System Set
Test Set
Impact Direction
---------------
Mean Times
-------------
--
3
0
Impact Direction
Average
Material
Hardness Scale
Tolerance Limit
Hard/б
b
:Hard