GARDEN-TOWER IR
Installation and user manual
Page 15 of 24
Alignment
1.
2.
3.
Barrier power supply (see page 10)
Check that all the red leds (ALM LEDs) on the
expansion and tamper boards of the RX optics
are all off (Image 1)
If one or more leds are not off, gently adjust the
relevant lenses in a horizontal and vertical
direction towards the transmitters until all the
leds are turned off.
If one or more leds are not turned off, go directly
to the instrumental alignment procedure
described on page 16.
NORMAL
NOISE
TEST
LED ALM
T.P.
MI-TECH.
RX
FEBRX
Image 1
WARNINGS:
Before the instrumental alignment verify the following on the receiver motherboard:
•
the blinding led must be switched off
•
the AND and S.LOW jumpers must be set to OFF
•
the MASK and SPEED trimmer regulation must remain in vertical position
Image 2
VERTICAL
ADJUSTMENT
BY 30°
HORIZONTAL
ADJUSTMENT BY 180°
