MiTAC TYAN S7103, Manual, Page: 85 / 168

http://www.tyan.com
85
Port 60/64 Emulation
Enables I/O Port 60h/64h emulation support. This should be enabled for the
complete USB keyboard legacy support for non-USB aware OSes.
Enabled / Disabled
USB transfer time-out
The time-out value for Control, Bulk and Interrupt transfers.
1 sec / 5 sec / 10 sec / 20 sec
Device reset time-out
USB mass storage device Start Unit command time-out.
10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. ‘AUTO’ uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Auto / Manual
AMI Virtual CDROM0 1.00
Mass storage device emulation type. ‘Auto’ enumerates devices according to their
media format. Optical drives are emulated as ‘CDROM’, drives with no media will be
emulated according to a drive type.
Auto / Floppy / Forced FDD / Hard Disk / CD-OM