MiTAC TYAN S5557, Manual

Page: 55 / 95

http://www.tyan.com
55
Internet Protocol
Initiator IP address is system assigned in IP6 mode. In Autoconfigure mode, iSCSI
driver will attempt to connect iSCSI target via IPv4 stack, if failed then attempt IPv6
stack.
IP4 / IP6 / Autoconfigure
Connection Retry Count
The minimum value is 0 and the maximum is 16. 0 means no retry.
Connection Establishing Timeout
The timeout value in milliseconds. The minimum value is 100 milliseconds and the
maximum is 20 seconds.
Configure ISID
OUI-format ISID in 6 bytes, default value is derived from MAC address. Only last 3
bytes are configurable. Example: update 0ABBCCDDEEFF to OABBCCF07901 by
input F07901.
Enable DHCP
Enable DHCP.
Disabled / Enabled
Initiator IP Address
Enter IP address in dotted-decimal notation.
Initiator Subnet Mask
Enter IP address in dotted-decimal notation.
Gateway
Enter IP address in dotted-decimal notation.
Target Name
The worldwide unique name of the target. Only iqn. format is accepted.
iqn. xxx
Target Address
Enter Target address in IPv4, IPv6 or URL format. You need to configure DNS server
address in advance if input a URL string.
Target Port
Target Port.
Boot LUN
Hexadecimal representation of the LU number. Examples are: 4752-3A4F-6b7e-3F99,
6734-9-156f-127, 4186-9.