http://www.tyan.com
47
Device reset time-out
USB mass storage device Start Unit command time-out.
10 sec
/ 20 sec
/ 30 sec / 40 sec
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller.
‘AUTO’ uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Auto
/ Manual
3.3.11 CSM Configuration
CSM support
Enable/Disable CSM Support
Disabled /
Enabled
Option ROM Messages
Set display mode for Option ROM
Force BIOS
/ Keep Current
INT19 Trap Resource
BIOS reaction on INT19 trapping by option ROM:
IMMEDIATE - execute the trap right away; POSTPONED
– execute the trap during
legacy boot.
Immediate
/ Postponed
Summary of Contents for TYAN S5557
