MiTAC TYAN S5545, Manual, Page: 18 / 96

http://www.tyan.com
18
J101: Clear CMOS Jumper
3 1
Normal (
Default
)
You can reset the CMOS settings by using this jumper. This can be
useful if you have forgotten your system/setup password, or need to
clear the system BIOS setting.
1. Power off system and disconnect power connectors from the
motherboard.
2. Remove the jumper from Pin_2 and Pin_3 (Default setting).
3. Move the jumper cap to close Pin_1 and Pin_2 for several seconds
to Clear CMOS.
4. Put jumper cap back to Pin_2 and Pin_3 (Default setting).
5. Reconnect power connectors to the motherboard and power on
system.
1 3
Clear TRC
J90: Security Override Jumper
3 1
Pin 1-2 Closed: Normal (
Default)
1 3
Pin 2-3 Closed: Security Override
J96: ME Recovery Jumper
3 1
Pin 1-2 Closed: Normal (
Default)
1 3
Pin 2-3 Closed: Configure
3 1
Remove Cap: Recovery