MiTAC Tyan S5542, Manual

Page: 33 / 112

http://www.tyan.com
33
2.6 Installing the Processor and Heat sink
The S5542 supported Intel
®
processors are listed in section 1.2 Hardware
Specifications on page 5. Check our website at
http://www.tyan.com
for latest
processor support.
NOTE:
MiTAC TYAN is not liable for damage as a result of operating an
unsupported configuration.
Processor Installation (SNB_H4 (LGA1151) for Intel Skylake CPU)
Follow the steps below to install the processors and heat sinks.
Please note that the illustrations are based on a SNB_H4 (LGA1151) which may not
look exactly like the motherboard you purchased. Therefore, the illustrations should
be held for your reference only.
NOTE:
Please save and replace the CPU protection cap when returning for service.
1.
Locate the CPU socket.
2. Pull the CPU lever slightly away from the socket and then push it to a fully
open position.
3. Open the CPU socket cover.