manualshive.com logo in svg

MiTAC N672 Series, User Manual, Page: 23 / 26

Share
Download
MiTAC N672 Series User Manual Download Page 23

22

Regulatory Information

For regulatory identification purposes, the product is assigned a model number of N672A & N672B.
Marking labels located on the exterior of your device indicate the regulations that your model complies 

with. Please check the marking labels on your device and refer to the corresponding statements in this 

chapter. Some notices apply to specific models only.
Maximum radio frequency (RF) power for Europe:
• WLAN 2.4 GHz: 20 dBm
• WLAN 5 GHz: 20 dBm
• Bluetooth: 10 dBm
• WWAN: 23 dBm

FCC

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause harmful interference to radio 

or television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures:

• 

Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturer could void the user's 

authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation.

Please note:

 The use of a non-shielded interface cable with this equipment is prohibited.

USA Contact Information

Magellan 

279 E Arrow Highway San Dimas, CA 91773 USA

 

+1 909-394-5000 

http://www.magellangps.com

CE

Products with the CE marking comply with Radio Equipment Directive (Directive 2014/53/EU) - issued 

by the Commission of the European Community.

Summary of Contents for N672 Series



























Reviews:

No comments