MiTAC E8020, User Manual

Page: 10 / 132

5
1.2 Server Introduction
This is an isometric view of E8020 server. There are some PCIe slot/Drive bays/IO
connections in the front depending on different configurations. On the rear end,
there is a floating connector that fits into bus bar providing power to this sled.
There are sharp edges on the metal parts. This is generic to the low-
cost OCP design. Be sure to wear gloves when you
assemble/disassemble any mechanical components. For example,
PCIe bracket, PCIe cards and installing cables…etc.