Mistral RF-B700S2 Instruction Manual Download Page 1

Be sure to keep for safety !

Read this safety instructions thoroughly and carefully before using. Please keep this user guide
at hand for future reference.

1

WARNING

CAUTION

Indicates the possibility of danger of
death or serious injury 

Indicates the possibility of risk of personal injury
or material damage

DO NOT remove or disassemble!

Be sure to unplug from receptacle(outlet/mains)!

NO., DO NOT...

Be sure to keep and follow!

Other Signs

WARNING

Do not plug several appliances into same
wall outlet (receptacle).

It can be a cause of overheating and/or fire.
Use an exclusive grounding receptacle for the
refrigerator.

Never let power cord be crushed 
by refrigerator itself or other (heavy) objects.
Never bend power cord excessively. 

If cord is damaged or peeled, it can be a cause
of fire and electric shock.

Never use damaged power cord or plug,
loose receptacle.

There is a risk of fire, electric shock or serious
injury.

Never unplug by pulling only the power cord
wire. Always grip the plug firmly.

Never hold the power cord or plug with wet
hands.

There is a risk of electric shock.

Be sure to ground. Check if your wall outlet is
grounding (earthed) one.

There is a risk of electric shock hazards.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
simmilary qualified person in order to avoid a hazard.

Summary of Contents for RF-B700S2























Reviews: