background image

UNDERSINK FILTER

INSTALLATION MANUAL

Your filter specs:

THANK YOU FOR CHOOSING

MIST FILTERS

Model: MFS092

Tested and Certified by IAMPO R&T

against NSF/ANSI 42 Standard  for

material safety, structural integrity and

aesthetic chlorine reduction.    

FILTER LIFE

20,000 gallons

FLOW RATE

1.5 gpm / 60 psi

OPERATING

PRESSURE

30-120 psi

OPERATING

TEMPERATURE

40-100˚F

Do not use with water that is microbiologicallly unsafe or of

unknown quality without adequate disinfection before or after the system.

Summary of Contents for MFS092

Page 1: ...st NSF ANSI 42 Standard for material safety structural integrity and aesthetic chlorine reduction FILTER LIFE 20 000 gallons FLOW RATE 1 5 gpm 60 psi OPERATING PRESSURE 30 120 psi OPERATING TEMPERATURE 40 100 F Do not use with water that is microbiologicallly unsafe or of unknown quality without adequate disinfection before or after the system ...

Page 2: ...layout FOR 1 2 FIP OUTLET VALVE please get the compression hose to 1 2 FIP adapter and adapter 3 8 ready For the 3 8 OD Coompression outlet valve you do NOT need to use any of the compression hose adapters 1 2 FIP Outlet 3 8 Compression Outlet INSTALLATION STEPS INSTALLATION PREPARATION 2 Find the desired location to mount the water filtration system 3 Place the installation template at the desire...

Page 3: ...urize the new connected system and check for any possible leakage 2 Disconnect the faucet hose from the water inlet valve angle valve outlet is 3 8 If it is a 1 2 FIP water inlet valve please get the 1 2 FIP to 3 8 compression adapter 2 Disconnect the faucet hose from the water inlet valve attach the 1 2 FIP to 3 8 compression adapter Make sure the O ring is in postion apply Teflon tape at a clock...

Page 4: ...ut 1 4 turn to complete the filter installation QUESTIONS COMMENTS Contact us Mist Filters info mistfilters com 888 612 2513 3 Flush about 2 3 gallons to condition the new filter 1 Turn about 1 4 turn to the left to release the filter then remove the old filter FILTER REPLACEMENT 5 Make sure the faucet is turned on and then turn the water inlet valve back on to flush the new system for 5 minutes t...

Reviews: