Mirta HDP 210, Operating Instructions Manual

Page: 23 / 34

22
model
HDP 210
SAFETY INSTRUCTIONS
IMPORTANT!
IMPORTANT SAFEGUARDS
1. Check if the voltage indicated on the appliance corresponds to the local voltage before
you connect the appliance.
2. Do not expose the appliance to moisture nor take it with wet hands.
3. Do not immerse the hairdryer or its parts into water or other liquids.
4. Always unplug the appliance:
¼
after use;
¼
if it is damaged;
¼
while cleaning.
5. Do not leave the appliance unattended, if it is turned on.
6. Do not pull the cord when you turn off the appliance, hold the plug.
7. Before the use, make sure the nozzle is installed correctly.
8. Do not use the nozzles that are not supplied with the appliance.
9. The air outlet gates are heated up during the work, that is why it is important to avoid
straight contact with the outlet gates.
10. Make sure the power cord does not contact the air outlet gates while working.
11. Never cover the inlet or outlet gates.
12. Never let children use the appliance without supervision.
13. Protection air inlet gates make sure hair does not get into the appliance. If the gates
become cluttered, clean them (i.e., with the help of a dry brush).
14. Never use the hair dryer for drying artificial hair.
15. Do not use the appliance for purposes other than specified in this manual.
16. Do not use cleaning detergents that may cause rust, as well as active chemicals.
17. Do not use the appliance, if it is damaged in any manner. Ask a qualified service engi-
neer for examination, exchange or repair.
18. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.