6
2.0
Mechanical Installation
To mount the RAM-300LCD open the front door, remove the dead front plate and mount the
backbox to the wall using the four screws provided. This enclosure may also be mounted to a
4” square electrical box. There are two conduit areas provided at the bottom center of the
enclosure. With the dead front plate removed, you may do the functional setup and wiring
before replacing the dead front, see following sections.
7.5"
7.0
1.22"
6.0"
5.9"
FOUR
MOUNTING
HOLES
Figure 2 Mechanical Installation
firealarmresources.com
Summary of Contents for RAM-300LCD Series
Page 2: ...firealarmresources com...
