59
Configuration
10.9
6. Clear Event Log (Command-Menu)
10.10 7. Dialer Config (Command-Menu)
The following illustration shows the dialer configuration menu. This menu will show up only if
there is a built-in dialer on the main board. Each item in this menu is described below in detail.
Note:
10.3 How to Use the Keypad to Program the FR-320 on page 49
for
detailed instructions on making menu selections.
Select the type of log to clear. Press the
“ENTER” key. The system will then
confirm before clearing logs.
Press the “ENTER” key to confirm or the
“CANCEL” key to cancel the operation.
Use this function to clear alarm logs, event logs, or both.
Note:
10.3 How to Use the Keypad to Program the FR-320 on page 49
for
detailed instructions on making menu selections.
i
-Select Log-
1. Alarm Log
2. General Log
3. All Logs
Clear all the
Selected log(s)? Y
Log(s) cleared
i
-Dialer Config-
1. Account Info
2. Telephone line
3. Report Options
4. Time Parameter
5. Enable/Disable
Summary of Contents for FR-320 Series
Page 2: ......
