manualshive.com logo in svg

Mirapoint RazorSafe 170, Hardware Manual, Page: 3 / 76

Share
Download
Mirapoint RazorSafe 170 Hardware Manual Download Page 3

  

3

Preface

This guide documents hardware installation and maintenance issues for Mirapoint 
RazorSafe 170 (RS170) appliances.

For a complete list and description of the Mirapoint product line, contact your local 
reseller, or visit Mirapoint online at:

http://www.mirapoint.com

This guide contains the following chapters:

◆

Chapter 1, About Your Appliance

—describes the various parts, features, 

indicators, codes and messages of the appliance.

◆

Chapter 2, Installing Appliance Components

—describes how to remove and 

install the various field-supported components.

◆

Appendix A, Troubleshooting Appliance Hardware

—describes the various 

potential component failures and solutions.

◆

Appendix B, Jumpers and Connectors

—describes the various system jumpers, 

switches and connectors on the system board.

About Mirapoint Documentation

Documentation for all Mirapoint products is available through the Information 
Library on the Mirapoint Support website:

https://support.mirapoint.com/

 

The Information Library provides the hardware and software documentation for all 
supported Mirapoint releases and appliances, and the Support Knowledge Base. 
The Support site is accessible to all customers with a valid Support Contract. If your 
company has a valid contract but you need a Support login ID, email

 

[email protected]

.

For a glossary of terms associated with Mirapoint products, see

 http://

www.mirapoint.com/glossary/

.

Getting Technical Support

If you experience problems with your appliance, contact the company from which 
you purchased your Mirapoint appliance.

Summary of Contents for RazorSafe 170













































































Reviews:

No comments