Miranda NV9606, User Manual

Page: 51 / 90

NV9607 Control Panel • User’s Guide 41
5. Operation
Operating Concepts
Also, when source preview mode is on, all buttons except source buttons, source-related buttons,
the ‘Source Preview’ button, and the ‘Take’ button are disabled (dark).
To cancel source preview mode, simply press the ‘Source Preview’ button again. Any pending take
will also be canceled and all buttons become active again.
X Source/Destination
The ‘Source/Destination’ button selects both a source and a destination.
All Source Shift
The ‘Source Shift’ button toggles between the first and second sets of sources.
The button affects the operation of any source button (in any mode). Source buttons represent two
sources (and, in multi-destination mode, a destination). One source belongs to source set 1 and the
other belongs to source set 2.
All Take
This button performs a take when a panel is in source preview mode (i.e., it has a ‘Source Preview’
button and it is high-tally).
When the panel is not in source preview mode, any take button is disabled and dark.
When the panel is in source preview mode, the take button is dark until you select a source. Then
the take button turns low-tally red and the source name appears in the ‘Preview’ column of the dis-
play. After you press the take button, the button goes dark again.
To cancel a pending take, press the ‘Source Preview’ button again. The panel will exit source pre-
view mode.
In MD mode, a take button switches the preset source device(s) to the selected destination device(s)
on all levels.
In the other modes, a take button routes the preset source device(s) on selected levels to the selected
destination device.
All Undefined
An undefined button cannot be used and appears dark (unlit) on the panel. The term “undefined”
has meaning primarily to the configurer.
Lock, Protect, and Release
In a multi-user system, routes made by one user can be made safe from being accidentally or mali-
ciously change by another user.
Definitions
Owner The user ID of a panel where a lock or protect was issued.
Source lock No one can use the source.
Source protect No one but the owner can use the source.
Destination lock No one can route to the destination.
Destination protect No one but the owner can route to the destination.
Release To remove a lock or protect.
Some control panels can lock or protect both sources and destinations. However, The NV9607 pro-
vides locks and protects for destinations only .