manualshive.com logo in svg

Miranda NV9602, User Manual, Page: 49 / 68

Share
Download
Miranda NV9602 User Manual Download Page 49

NV9602 Control Panel  •  User’s Guide

39

5. Operation

Operating Concepts

Automatic Data Routing

A take involving a machine control level occurs automatically, without intervention, regardless of 
who is using a device.
This option applies in all operating modes.

Manual Data Routing

A take involving a machine control level occurs on all levels except the machine control level. You 
must route the machine control level as a breakaway. 
When a take involving a machine control level occurs, the status display shows the name of the 
machine control level and the destination display shows “In Use.” That is a signal that you need to 
take the machine control level as a breakaway.
This option applies only in single-destination mode with breakaway. 

Semi-Automatic Data Routing

A take involving a source or a destination having a machine control level might not occur immedi-
ately if the source or destination device is in use. 
This option applies in all operating modes.

If neither device is “in use” the take occurs immediately. Otherwise, you need to press the source 
button again to complete the take. 

If the source device is in use, the ‘Status’ display shows “Src Used” and the destination display 
shows “Retry?”
If the source device is in use, the ‘Status’ display shows “DestUsed” and the destination display 
shows “Retry?”
If the source device is in use, the ‘Status’ display shows “BothUsed” and the destination display 
shows “Retry?”

If you do not press the (same) source button again, the take is canceled. (It will time out.) 

Case 1

 

—

 

Single-Destination Mode with or without Breakaway 

1 Press a source button. 
2 Examine the display. 
3 If the destination display shows “Retry,” press the source button again to complete the take. The 

take will time out if you do not press the source button. 

Case 2

 

—

 

Limited X-Y Mode

1 Press a destination button. 
2 Press a source button.
3 Examine the display. 
4 If the destination display shows “Retry,” press the source button again to complete the take. The 

take will time out if you do not press the source button. 

Case 3

 

—

 

Multi-Destination Mode

1 Press a source button. 
2 Examine the display. 
3 If the destination display shows “Retry,” press the source button again to complete the take. The 

take will time out if you do not press the source button. 

Summary of Contents for NV9602





































































Reviews:

No comments