Miranda Kaleido-X (4RU) User Manual Download Page 53

Page: 53 / 388

Obtaining EDID Data From Display Screens When Using the DXF-100 Interface

Note:

The RS-422 port on the Kaleido-X side has no ground pin. Using the DE-9S-to-RJ-45 adapter, an

external device should be able to communicate with a Kaleido-X despite the lack of a ground.

XEdit Application Shortcuts

The following is a list of shortcut keys available in XEdit to execute specific actions.

Action Description

Shortcut Key

Restore the factory resolutions

Ctrl+Shift+E

Restore the factory audio scales

Ctrl+Shift+A

Toggle the grid

Ctrl+Shift+G

Toggle the Tips pane

Ctrl+Shift+H

Restore the factory widget libraries

Ctrl+Shift+L

Toggle the Properties pane

Ctrl+Shift+P

Toggle the layout navigator

Ctrl+Shift+N

Toggle the status bar

Ctrl+Shift+S

Toggle the Tools pane

Ctrl+Shift+T

Cut widget

Ctrl+X

Copy widget

Ctrl+C

Paste widget

Ctrl+V

Duplicate widget

Ctrl+D

Select all widgets

Ctrl+A

Send widget to back

Ctrl+B

Send widget to front

Ctrl+R

Delete selection

Delete

Redo last operation

Ctrl+Y

Undo last operation

Ctrl+Z

Unlock composite

Summary of Contents for Kaleido-X (4RU)





































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X (4RU)

Reviews:

Miranda Kaleido-X (4RU), User Manual, Page: 53 / 388

Search results

Summary of Contents for Kaleido-X (4RU)

Reviews: