Miranda Kaleido-X (4RU), User Manual, Page: 43 / 388

Step 5 – System Verification
33
Step 5 – System Verification
Verifying the Kaleido-X’s Internal Statuses and Options
To perform a system verification, do the following:
1. You can check internal system statuses via the Web-based XAdmin application. There are two ways to
access XAdmin:
Method 1: Use XEdit on a client PC to start the XAdmin application (see “Step 4 – XEdit Installation” on
page 26). On the Configure menu, click Use XAdmin. This will open your default Web browser.
Method 2: From a workstation on the same subnet, open a Web browser window and type the IP
address of the Kaleido-X frame, in the address bar. (The frame must have the Kaleido-X software
version 2.10 or later.)