Miranda iMC-Panel-300, Operator'S Manual

Page: 15 / 176

3
iMC-Panel-300
Operator’s Guide (for Imagestore 750s)
• Video monitors properly set.
Ensure that your control room’s program and preview monitors are properly set, according
to the requirements of your facility.
•
NV9000 requirements met.
You are using a master control system in conjunction with an NV9000 router control system.
Ensure that your master control system and NV9000 are communicating with each other and
configured as required.
•
Channels properly configured.
Ensure that each Imagestore 750 has been configured (using the Imagestore 750 Configura-
tor or by using the Imagestore 750’s front panel). Refer also to the
Imagestore 750 Reference
Manual for more information.
•
All control panels properly configured.
All control panels (and GUIs) should be configured and operational. Refer to the MCS Panel
Configuration Editor User’s Guide for details.
• User accounts for PCs used for master control set to ‘Standard User’ or better.
Master control software does not function properly when user accounts are set to ‘Restricted
User’ or its equivalent.
Options
The Master Control Tally Processor is an option. It provides 32 GPI inputs and 32 GPI outputs. It
can monitor master control events and trigger master control events.
Intuition XG is an option that adds rich branding to master control because it includes sophisti-
cated design tools, a powerful graphics processor, and storage for video clips, and access to
“live” data.