Miranda iMC-Panel-300, Operator'S Manual

Page: 118 / 176

106
Operation
General Information
Menu Button Color
The menu buttons use color to represent different types of functions and give you visual
feedback:
Thumbnail Color
The DSK and XG keyer layer thumbnail images in the main menu give you an indication of the
state of the DSK or XG keyer layer.
The thumbnail frame is blue when the DSK or XG keyer layer is on the program bus (i.e., program
output). Otherwise, the thumbnail frame is grey.
Some gray buttons are navigation buttons. (The ‘Main Menu’ button, for
example, always takes you to the main menu. Most other navigation buttons
take you to sub-menus. Some gray buttons are function buttons.
Most green buttons are function buttons. Most of these are toggles: when you
press one, its function becomes active and the button turns bright green. When
a button is dark green, its function is inactive.
Some green buttons are momentary functions. They turn bright green momen-
tarily while they are performing their functions.
List buttons are blue or green. (A list has at most one selected entry.)
A selected list entry is high-tally.
‘Apply’ buttons are bright red. These buttons are found in the audio channel
shuffle menus. A few other buttons are light red because you should exercise
caution when using them. (‘Restart Panel’ is an example.)