4. Comissioning
MiR AI Camera Getting started (en) 09/2019 - v.1.0 ©Copyright 2019: Mobile Industrial Robots A/S.
34
possible to improve the performance of the MiR AI Camera.
To begin the Training phase, enter the training session where you have finished labeling, and
select
Start training
.
NOTICE
Only select
Start training
when you have finished labeling. You use one of
your credits for each training session you begin.
The Training phase does not require any more interaction. MiR AI Training Tool will
automatically complete the training for the MiR AI Camera. This can take several hours to
complete, but it is not necessary for MiR AI Training Tool to be open on your PC throughout
the training. Once the training is complete, you will receive an e-mail, and can continue to
set up your MiR AI Camera through MiRFleet.
4.5 Upload the data model
The training phase outputs a data model. This model contains the information required for
MiR AI Camera to detect the objects labeled in the validation phase. The following steps
describe how to upload the file to the connected MiR AI Cameras:
1.
Select
Download mode
l for the session you have created for your MiR AI Cameras.
The data model is usually approximately 20-30 MB.
